High Efficiency Double Roller Extrusion Granulator

double roller extrusion granulator 1.High qualtiy 2.High granulation rate(min95%) 3.Wide practicability raw materials

High Efficiency Double Roller Extrusion Granulator

 ______________________________________________________________

Introduction

1)it needs no drying machine and suitable for small investment

2)it adopts normal production technology without dryer.

3)the body adopts special acid-resisting stainless steel plate.us the machine can work normally in the conditions of high temperature,wet eather,and coldest weather.

4)the speed of mixing materials is so fast that fertilizer is not eary to get wet.  

5)roll granulator adopts double roller for fertilizer extrusion granulator with low investment

Structure

1. A rack part:all the work of the machine fully installed fixed to the rack. Rack of the machine are made of medium carbon steel plate, channel steel welded together, and through strict quality control and the specific process requirements to achieve the purpose of this machine, equipped with lifting holes in the middle of the four corners of the rack, in order to handling and transportation.2. The drive connection section: motor driven pulley, belt, reducer drive, so that the nose work. Of another sprocket, chain drive chain is passed to the broken separation work part. Which drive reducer and nose section, with a nylon pin coupling engages with the passing driver.3. The nose parts:the driving wheel pin coupling transmitted to the drive roller, the roller in synchrony with by an outside wheel to ensure active and passive axis on both sides of a particular bearing, the bearing frame. installed in the rack.4. Broken separate working parts:the flow of the lower side of the broken material after roll extrusion indoor, dual-axis rotation of the mace, separable ball material and returned material.

Technical Parameter

Type	DZJ15B-15C-15D	DZJ22B-22C-22D	DZJ30B-30C-30D	DZJ45B-45C-45D
Granule diameter(mm)	ø2.5-ø30	ø2.5-ø30	ø3.2-50	ø20-ø60
Power(kw)	15	22	30	45
output(T/H)	1~1.5	2~2.5	3~3.5	4~5

 Working PrincipleThe series of roll granulation is extrusion-slip model, its working principle is the belt and pulley driven by electric motors, to the driving shaft to pass through the reducer, and synchronization off the gear and the driven shaft opposite the work.Material from the hopper to join, after the roll extrusion molding, mold release, making the ball, and after a chain sent to the broken screen studio, under the screen and the separation of the finished pieces (the ball) tablets,and then return to the material with new material mixed, and then granulation.With the continuous rotation of motor, the material continues to enter in order to achieve mass production.

please contact me freely!

Name: Rachel shi

Tel:0086-371-87782820

Fax:0086-371-87782821

skpye: rachel23212

QQ:2289918366

High Efficiency Double Roller Extrusion Granulator